Regenerative catalytic oxidation system (RCO)
The organic gas enters the oxidation furnace through the blower and is heated by fuel oxidation to about 250~300oC.At this temperature, the organic components in the waste gas are oxidized and decomposed into carbon dioxide and water under the action of the catalyst, and the high-temperature flue gas after the reaction enters the ceramic heat storage body with special structure, and most of the heat is absorbed by the heat storage body (above 95%), and the temperature is reduced to the temperature close to the inlet, and then discharged through the chimney.Normally, regenerative combustion oxidation system consists of three regenerator, exhaust gas under the control of PLC program, circulation perform the following operation: enter the heat regenerator, make preheating of the degree of gas, and then into the thermal oxidation chamber, treatment of waste gas after not heat storage regenerator heat emissions, - part of the process gas is led back to the third chamber, purging the remaining untreated waste gas.In the case of low pollutant removal efficiency requirements, two-room structure can also be designed to save money.
Process flow chart
1. High temperature stabilized alumina carrier and high temperature and corrosion resistant alloy steel framework to ensure that the catalyst is not sintered and maintain the stable specific surface area of the catalyst;
2. high temperature stainless steel edge;
3. Convenient cleaning catalyst to ensure very long service life of catalyst;
4. highly dispersed precious metals;
5. Low resistance, save operation cost;
6. high activity at low temperature;
7. very high mechanical strength;
8. very high thermal stability
Incinerator Features
1. RCO process is adopted to purify organic waste gas, which can remove a variety of organic pollutants at the same time.
2. It has the advantages of simple process and compact operation and reliability.
3. RCO has the advantage of low operating cost, and its heat recovery efficiency is generally more than 95%;
4. No waste water is generated in the whole process, and no secondary pollution such as NOX is generated in the purification process;
5. RCO purification equipment can be used with the oven, and the purified gas can be directly recycled into the oven heating equipment, achieving the purpose of energy saving and emission reduction
Applicable scope
The treatment technology is especially suitable for heat recovery, and no other process can be used as heat exchange recovery program.Apply to the same production line, on the basis of different products, waste gas composition change constantly or waste gas concentration of the volatile situation application industries include petrochemical rubber paint finishing furniture in printed tin printing and other industries of high concentration organic waste gas purification treatment, can deal with the organic matter types including benzene class ketone ester phenols etc. It also applies to the concentration of sewage treatment station of deodorization treatment between 500 ~ 7000 mg/m3 of organic waste gases or fumes
Telephone: 0510-80731188